Packet
A packet is the unit of data that is routed between an origin and a destination on the Internet. When any file is sent from one place to another on the Internet, the Transmission Control Protocol (TCP) layer of TCP/IP divides the file into "chunks" of an efficient size for routing. Each of these packets is separately numbered and includes the Internet address of the destination. The individual packets for a given file may travel different routes through the Internet. When they have all arrived, they are reassembled into the original file (by the TCP layer at the receiving end).
Packet filtering
On the Internet, packet filtering is the process of passing or blocking packets at a network interface based on source and destination addresses, ports, or protocols. The process is used in conjunction with packet mangling and Network Address Translation (NAT). Packet filtering is often part of a firewall program for protecting a local network from unwanted intrusion. In a software firewall; packet filtering is done by a program called a packet filter.
Packet loss
Packet loss is the failure of one or more transmitted packets to arrive at their destination. This event can cause noticeable effects in all types of digital communications.
The effects of packet loss:
1. In data, packet loss produces errors.
2. In videoconference environments it can create jitter.
3. In pure audio communications, such as VoIP, it can cause jitter and frequent gaps in received speech.
4. In the worst cases, packet loss can cause severe mutilation of received data, broken-up images, unintelligible speech or even the complete absence of a received signal.
Packet-switched
Packet-switched describes the type of network in which relatively small units of data called packets are routed through a network based on the destination address contained within each packet. Breaking communication down into packets allows the same data path to be shared among many users in the network.
